Operating Instructions Stove Dimensions - Vermont Castings 3232 Installation And Operating Manual

Radiance Direct Vent/Natural Vent Gas Heater
Radiance Direct Vent/Natural Vent Stove Dimensions
See Page 6 for Flue Collar
Centerline Dimensions.
���� ������ �
�
Fig. 1 Radiance dimensions.
The Radiance stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be converted
into a Natural Vent unit in the field. If a Natural Vent Heater is desired, the Vermont Castings Z31D00 FSD-
HAG Draft Hood must be directly installed to the top of the unit according to the installation instructions.
The Draft Hood Adapter is available in the 7FSDHASK stove kit or as a separate item.
When the Radiance stove is converted to Natural Vent, it uses 4" vent pipe. For aesthetic purposes the CFM
direct vent system may be used up to the ceiling.
44
14���"
(3.7cm)
4���"
(1.2cm)
29���"
(7.6cm)
31"
(7.9cm)
ST126
RDV40 dimensions
10/99
7" Outer Dia.
(1.8cm)
28"
(711mm)
5"
(127mm)
Attention
� � � � � � � �
Supply
Inlet
9���"
(241mm)
18���"
(464mm)
4188
20004188