Verizon MI424WR User Manual page 9

Rear Panel
The rear panel of the Router features seven ports (Coax,
Ethernet [4], and Power), as well as a Reset button and Power switch.
Coax Port
The Coax port connects the Router to the
coaxial cable.
Reset Button
To restore the Router's factory default settings, press and hold the Reset button
for approximately ten seconds. The reset process will start about
after releasing the button. When the Router resets, all the lights on the front
panel turn off, and then some of the lights start flashing. The Router has com-
pleted its reset process when the Power light glows steadily green.
M
Caution: Do not unplug the Power cord from the Router dur-
ing the reset process. Doing so may result in the loss of the
Router's configuration information. If this occurs, reset the
Router again.
WAN Ethernet Port
The Ethernet port connects the Router to the
WAN
LAN Ethernet Ports (4)
The Ethernet ports connect devices to the Router via Ethernet cables to cre-
LAN
ate a local area network (
sensing ports, and either a straight-through or crossover Ethernet cable can be
used when connecting devices to the ports.
Wireless Broadband Router User Manual
). The
LAN
or other devices using a
ISP
ISP
Ethernet ports are 10/100 Mbps auto-
LAN
6
Ethernet,
WAN LAN
seconds
ten
using an Ethernet cable.