Verizon MI424WR User Manual page 67

Wireless Broadband Router User Manual
Network Displays the type of network to which the link is connected. Since this
is a broadband connection (connected to the Internet), "Broadband Connection
is displayed.
Connection Type Displays the type of connection. Since this is a coaxial connec-
tion, "Coax" is displayed.
Physical Address Displays the physical address of the network card used for the
network.
MTU
(Maximum Transmission Unit) specifies the largest packet size
MTU
permitted for Internet transmission. "Automatic" sets the at 1500. Other
MTU
choices include "Automatic by ," which sets the according to the
DHCP MTU
connection, and "Manual," which allows the to be set manually.
DHCP MTU
Coax Link
Check and configure the coax link connection in this section of the screen.
Channel Displays the channel frequency range of the coaxial connection. This
setting is not user configurable; it is for information only.
Privacy Toggle "Privacy" by clicking in the "Enabled" check box. If Privacy is
activated, all devices connected via coaxial cable must use the same password.
We recommend leaving the Privacy option deactivated.
Password Enter the Coax Link password here.
WAN Coax Connection Speeds
This section displays the Router's Tx and Rx speeds (in Mbps).
Internet Protocol
This section includes three options: No IP Address, Obtain an IP Address
Automatically, and Use the Following IP Address.
No IP Address Select this option if the connection has no
address. This is use-
IP
ful when the connection is operating under a bridge.
64