Configure Coax
Click Settings at the bottom-right of the Coax Properties screen generates the
"Configure Coax" screen.
General
The top part of the Configure Coax screen displays general communication
parameters. We recommend not changing the default values in this section unless
familiar with networking concepts.
Status Displays the status of the coax connection.v
When should this rule occur? Displays when the rule is active. To schedule rules,
see the "Advanced Settings" chapter
Network Displays the type of network.
Connection Type Displays the type of connection.
Physical Address Displays the physical address of the network card used for the
network.
MTU
(Maximum Transmission Unit) specifies the largest packet size per-
MTU
mitted for Internet transmission. "Automatic" sets the
es include "Automatic by
connection, and "Manual," which allows the
Chapter 5 Using Network Connections
," which sets the
DHCP
MTU
according to the
MTU
to be set manually.
MTU
55
at 1500. Other choic-
DHCP