define the required number of port ranges. Unused rows can be left
blank.
•
End Port - Enter the end of the range of port numbers. For as single
port (rather than a range), enter the same value for both the
and End Port.
•
Protocol - For each port range (each row), select the protocol (TCP,
UDP, or both) used by that port range.
Saving your Changes
can define al
You
l required applications before clicking the "Apply" button.
Use
th "Ports" and "Hide" links as necessary to open and close the Port Definition Panel so
e
you
ca define the ports for each application as needed.
n
32
Start Port