Accessory Storage; Power Cord Storage; Hose Storage - Craftsman CMXEVBE172500 Instruction Manual

Accessory Storage (Fig. I)
Accessories can be stored in the Accessory Holder Tab
Slots, located on the back of the Powerhead Assembly.
Fig. I
Accessories
Accessory
Holder
Tabs (2)
Power Cord Storage (Fig. J)
The Power Cord should be wrapped around both Accessory
Holders, located on the back of the Powerhead Assembly.
Snap the Cord Clip onto the Power Cord, to secure in place.
Fig. J
Powerhead
Assembly
Accessory
Holders (2)
8
SP7097-1 CMXEVBE172500.indb 8
Power Cord &
Cord Clip
Hose Assembly Storage (Fig. K)
The Hose Assembly may be stored by wrapping it around
the Powerhead Assembly, as shown.
CAUTION:
!
Do not operate vacuum while the hose is still wrapped
around the powerhead assembly in the storage
position.
WARNING:
!
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings
blocked; keep free of dust, lint, hair or anything that
may reduce air flow.
Fig. K
Powerhead
Assembly
Hose
Assembly
6/25/19 9:03 AM