Lenoxx BT9378 Manual page 8

Multi vol dial:
Use the multi vol control dial to adjust the mic vol, guitar vol and echo.
Mic 1 socket:
Connect a microphone to this socket to sing along to music tracks.
Mic 2 socket:
Connect a guitar input to this socket to play along to music tracks.
Corded microphone operation:
Insert the microphone into the microphone socket.
Prompt or sing into the microphone for amplification.
Use the multi vol dial to adjust the mic volume. Press the menu button and when 't' is shown on the
screen, use the multi vol dial to adjust the mic volume.
Record from mic (in socket) or guitar:
The Bluetooth speaker allows you to record your voice from mic input (when using a corded
microphone – not included) or sound from guitar input. If both are connected at the same time, they
will both have sound recorded.
Connect the corded mic to the mic 1 socket to record voice.
Connect the guitar input to the mic 2 socket to record guitar.
To record both at the same time, ensure both the mic and the guitar are connected.
The voice recordings can be saved onto a micro card or a USB stick.
Ensure a micro SD card is inserted into the TF card slot, or a USB stick is inserted into the USB port.
If both are inserted, the recordings will save onto USB stick only.
Ensure the unit is in aux in mode, with no aux in device connected.
Press the rec button on the unit to begin recording.
The speaker will say the words 'recording mode'. The speaker will begin recording, the recording
time will show on the display screen.
Speak/sing into the mic or play the guitar.
When you need to stop recording, press and hold the REC button for two seconds.
The speaker will stop recording.
The word REC will show on the display screen. Press the play button on the speaker to playback the
recording.
To do another recording, put the speaker into AUX in mode and press the REC button to record.
The file recorded will be saved on the USB stick and will be saved in MP3 format.