Lenoxx BT9378 Manual page 7

FUNCTIONS
Bluetooth:
Press the mode button to switch to Bluetooth mode.
Open the Bluetooth settings on your Bluetooth device (e.g.: smart phone). Look for the Bluetooth
name BT9378 and pair.
Begin music playback from the Bluetooth device.
AUX:
Press the mode button to switch to Aux in mode.
Connect an Aux in lead (not included) to the aux in port on the speaker to the earphone socket of
your device (e.g.: MP3 player, smart phone or CD player with an earphone jack). Begin music
playback on your device. The sound will come through the speaker
USB:
Add a USB stick to the USB port. The speaker will detect that a USB stick has been added and will
begin music playback from it. The speaker will only playback MP3 music files on the stick. It cannot
read MP4 music files.
TF card:
Add a memory card to the TF card slot on the speaker. The speaker will detect that a memory card
has been added and will begin music playback from it. The speaker will only playback MP3 music
files on the card. It cannot read MP4 music files.
FM radio:
Press the model button to switch to FM radio mode.
Press and hold the play/pause button for two seconds.
The speaker will then search for local radio stations and scan them into the radio. They will be saved
into pre-set memory positions.
When radio stations have been scanned in and saved, use the previous and next buttons on the
speaker to change to a different radio station.
Menu:
Press the menu button to change between controlling the MIC VOL/GUI VOL/ECHO.
The display will show:
MIC VOL: t GUI VOL: g ECHO: E
Then use the multi vol control dial to adjust the mic vol, guitar vol and echo.
Both a corded microphone and a guitar can be used at the same time.
But two corded microphones or two guitars can not be used at the same time.