Veo Pan and Tilt User Manual page 24

Network Camera User's Guide
4 Preset /
Recall camera
locations
5 Camera tour
on / off
6 Auto pan on /
off
7 Video
resolution
8 Video
brightness
adjustment
9 Frame rate
adjustment
10 Audio On/Off
11 Video quality
adjustment
During preset mode, click the number and a dialogue box for
the inquiry of location name input will appear.
Preset or Recall camera 1~16 location(s)
Ex. If you press 5, then the camera will move to preset location
5.
Turn on or off the camera tour. Camera tour is comprised by
series of preset locations.
Turn on or off the auto pan of camera. While auto pan is on, the
camera will swing the camera from leftmost to rightmost tour
and then from rightmost to leftmost cyclically.
Adjust Video resolution
Network Camera provides 4 resolutions:
640x480, 352x288, 320x240, 176x144
For NTSC camera: 320x240 is suitable
For PAL camera: 352x288 and 176x144 are suitable
However, all resolution are available for NTSC and PAL camera
Adjust video brightness of camera
Adjust video frame rate via scrolling the listed numbers: 1, 5,
10, 15, 20, 25, 30
Turn on/off audio output function. Note: This function is not
available in Network Camera.
Adjust video quality.
Clarity: Video is better but frame rate may be slower
Fluency: Video is not as good as Clarity but frame rate may be
higher
Default: System default value
24/95