Log Settings; Access Optionsê - Honeywell VISTA Series User Manual

This parameter is used to set whether to adopt the RS232 for communications. To adopt the RS232, set this
parameter to Y; otherwise set it to N.
9. RS485
This parameter is used to set whether to adopt the RS485 for communications. To adopt the RS485, set this
parameter to Y; otherwise set it to N.
10. COMM Key
When the password is set to 0, no password is required for communication; when the password is set to a
non­zero value, this value is required for communication connection.
4.4 Log Settings
Select Log Opt and the information displayed on the screen is shown in the following figure:
1. Alm AttLog
When the available space for storage of attendance logs reaches the specified value, the FRT automatically
generates an alarm.
2. Recheck Min
If a user's attendance record already exists and the user checks in again within the specified period (unit:
minute), his/her second attendance record will not be stored.
4.5 Access Optionsê
The access control settings are valid for the FRTs with professional access control functions. The menu item
"Access Options" is inexistent in the fingerprint time attendance machines and the devices with simple access
control functions.
Select Access Options and the information displayed on the screen is shown in the following figure:
The Access Options includes the following options:
1. Def TP
Define the unlocking time segments every day of a week.
2. User Acc Opts
Set the unlocking time, the group that the user belongs to, and the unlocking combination.
3. GRP Time Def
Define the available time segments for users of a certain group to unlock.
4. Access Comb
Define diverse unlocking combinations. Each combination is composed of different groups.
5. Lock Time
Honeywell VISTA Series Products User Manual
Log Opt ▼
►Alarm AttLog 99
ReCheck Min 0
Access Options ▼
►Def Time
User Acc Opts
GRP Time Def
Access Comb
Lock Time
DSen. Delay
DSen. Mode NO
DSen. Alarm 30
Duress Options
ALARM CNT 0
Group VerType
­ 18
150
10