Miele DA 9090 W Operating And Installation Instructions page 25

a 1 non-return flap
for fitting in the exhaust socket on
the motor unit (not needed for
recirculation mode or for ... EXTA
appliance models)
Depending on the model, the non-
return flap may already be fitted.
b 1 non-return flap
(for ... EXTA appliance models only)
c Cover foil
for sealing the casing
Four 5 x 60 mm screws and
four 8 x 50 mm plugs
for securing to the wall.

The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the cooker hood.
One 3 x 8 mm screw
for securing the non-return flap
Two M4 x 8 mm screws,
two washers and
two caps
for securing the shelf.
Installation plan
Installation
25