Siemens 4AI I 4WIRE HART Information Leaflet page 10

English
Technical Data
Voltages, currents, potentials
Isolation
• between channels and
the backplane bus
• between the channels
• between channels and
load voltage (power bus)
Current consumption
• from load voltage L+ (power bus)
Power loss of submodule
Safety data
see corresponding EC special test certificate
For use in the USA or Canada
The control drawing for the ET 200iSP system is supplied
with the Power Supply module. Alternatively, you may find the
latest edition at
http://www.siemens.com/automation/service&support
with the reference A5E00455287.
A5E00308246-05
Yes
No
Yes
max. 30 mA
0,4 W
English