Chapter 29: Replacing The Full-Length Graphics Cards; Procedure; Post-Requisites - Dell XPS 8920 Service Manual

Replacing the full-length graphics cards
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1. Align the full-length graphics card with the slot on the system board.
2. Place the card into the slot and press down firmly until the full-length graphics card snaps into place.
3. Connect the power cables to the full-length graphics card.
4. Slide the tab on the full-length graphics-card bracket into the slot on the chassis and snap it into place.

Post-requisites

1. Follow the procedure from step 9 to step 10 in
2. Replace the right-side cover.
52 Replacing the full-length graphics cards
computer. After working inside your computer, follow the instructions in
"Replacing the power-supply unit".
29
After