Pcl-M10 - Electro-Voice MFX Series Rigging Manual

22 en | MFX accessories installation
4.2

PCL-M10

The PCL-M10 is an adapter with a 35mm pole mount Receptacle and an M10 threaded screw
attachment. It can be attached to brackets or the speaker directly and then mounted on a
speaker stand or pole.
To attach the PCL-M10 to the bracket you need the following included hardware:
–
–
–
1.
2.
3.
To attach the PCL-M10 directly to the speaker:
1.
2.
3.
2020-01 | V01 | F.01U.382.753
1 M10 screw
1 M10 flat washer
1 M10 nut
Place the PCL-M10 through the bracket.
Place the M10 washer and then the M10 nut onto the M10 threaded screw of the PCL-
M10.
Tighten the M10 nut, securing the PCL-M10 to the bracket.
Remove the M10 screw on the bottom of the speaker.
Screw the PCL-M10 all the way into the speaker.
Tighten fully.
Rigging manual
MFX Brackets & Accessories