Mfx Accessories Installation; Tc-02 Truss Clamp - Electro-Voice MFX Series Rigging Manual

MFX Brackets & Accessories
4

MFX accessories installation

4.1

TC-02 Truss clamp

The TC-02 Truss clamp is used to attach a bracket to a truss, or the loudspeaker directly to a
truss.
To attach the TC-02 Truss clamp to the bracket you need the following included hardware:
–
–
–
–
1.
2.
3.
To attach the TC-02 Truss clamp directly to the speaker you need the following included
hardware:
–
–
–
1.
2.
3.
1 M10 screw
1 M10 lock washer
1 M10 flat washer
1 M10 nut
Place the lock washer between the M10 screw and Truss Clamp.
Place the flat washer between the bracket and the nut.
Tighten the screw and nut.
1 M10 screw
1 M10 lock washer
1 M10 flat washer
Remove the M10 screw on the top of the speaker.
Place the lock washer between the M10 screw and Truss Clamp.
Insert the screw into the speaker and tighten fully.
Rigging manual
MFX accessories installation | en
2020-01 | V01 | F.01U.382.753
21