JVC RC-BZ5LB Service Manual page 8

www.freeservicemanuals.info
RC-BZ5LB/BZ5RD
RC-BZ6BU
<Rear cabinet assembly>
Removing the CD / cassette and amplifier
assembly from the rear cabinet
Prior to performing the following procedure, remove
the front cabinet assembly and the rear cabinet
assembly.
1. For the harness connecting the amplifier board with
the power board, disconnect it from connector
CN306 on the power board in the right rear cabinet
assembly. For the harness connecting the battery
terminal wire with the power board, disconnect it
from CN307 on the power board.
2. Remove the two screws C
cassette mechanism unit.
3. Release the harnesses from the slot a, b and c and
the notch of the main board in the rear cabinet.
4. Remove the CD / cassette and amplifier assembly
from the rear cabinet.
Now the CD / cassette and amplifier assembly is
ready to conduct burn-in.
1-8
(See Fig.7 and 8)
on the bottom of the
CD door eject button
Digitized in Heiloo Netherlands
CD / cassette and amplifier assembly
C
Slot c
Fig.7
CD / cassette and amplifier assembly
Fig.8
D
Key switch / display board
CN704
Fig.9
Slot a
Release the hornese
Power board
CN307
CN306
Slot b
11/28/2017