Shifting - Yamaha F250B Owner's Manual

The port side engine runs at the idling
G
speed.
Operate the center engine using the
G
port side control lever.
The starboard side engine runs at the
G
idling speed.
4. Push the engine selector switch three
times to operate the three engines.
ZMU06299
EMU35124
EWM00180
WARNING
Before shifting, make sure there are no
swimmers or obstacles in the water near
you.
Warm up the engine before shifting into gear.
Until the engine is warm, the idle speed may
ZMU06002
be higher than normal. The control lever of the
Digital electronic control can be operated
even at high engine speeds. However, gear
shifting will not work until the engine speed
has automatically decreased to a speed at
which actual gear shifting is possible. As a re-
sult, for quick gear shifting there could be a
time lag when the gear is shifted until the en-
gine speed has decreased sufficiently.
To shift out of neutral
1. Pull the neutral interlock trigger up (if
equipped).
ZMU06300
Operation
ZMU05999

Shifting

51