Working Instruction, Mechanical
3.10 Loud Speaker and Rubber Speaker Sealing
Follow the 2.1.1– 2.1.3 Disassembly instructions!
Use the tweezers to raise the Rubber Sealing out of its
cavity and then remove it.
Use the tweezers to remove the loudspeaker out of its
proper position, without touching the contacts.
Remove the protective tape on the loudspeaker.
Use the tweezers to place a new loudspeaker in its proper
position and press gently, guide pin into recession, without
touching the contacts, until it reaches the bottom of the
cavity.
3/000 21-1/FEA 209 544/128 A
17(25)
Sony Ericsson Mobile Communications AB