Blueant SuperTooth 3 Quick Start Manual

1
First Time Turn ON
and Pairing
BlueAnt
Press the green button
the LED will blinks red/blue.
4A
BlueAnt
Phonebook transfer will be initiated. Accept any
connection request on your phone if prompted.
Then wait until SUPERTOOTH 3 says:
"BlueAnt ST3 ready, connected to phone."
5A
Activation of Voice Answer:
"Voice Answer
Enabled"
Press VOL + for 5 seconds
until the SUPERTOOTH 3
confirms this mode.
BlueAnt
NOTE: Voice activation or deactivation is possible only if you're not on call.
6
Manual Answer
Press the green button
to answer incoming call.
8
Voice Answer
(if option is activated)
"Call from John. (BEEP)"
BlueAnt
IMPORTANT: Voice answer will not work if you don't wait for the BEEP.
®
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by BlueAnt Wireless is under license.
2
Confirm language selection by
pressing the
until soon as your language is
spoken on the SUPERTOOTH 3.
BlueAnt
After the BEEP
one of the words below:
"OK"
Quick Start Guide
BlueAnt
green button as
4B
In case your phone doesn't support automatic
transfer (dont press the
SUPERTOOTH 3), go to your phones
"Contact Menu", then select:
1) OPTION
2) Mark all
if available
3) Option
4) Send or Send Business card
5) Via Bluetooth
6) Select BlueAnt ST3
Note: Blackberry and Smart phone owners please refer to
section F of user guide.
5B
Deactivation of Voice Answer:
"Voice Answer
Disabled"
BlueAnt
7
End / Reject Call
Press the red button
to end or reject a call.
, say clearly
"ACCEPT CALL"
"ACCEPT"
"ANSWER"
"OK"
www.blueantwireless.com
3
The SUPERTOOTH 3 will then
ask you to pair your phone.
On your phone bluetooth
menu, search for
devices and select
BlueAnt ST3 then enter
0000 as pincode.
red key of your
BlueAnt
Press VOL - for 5 seconds
until the SUPERTOOTH 3
confirms this mode.
BlueAnt