Ax-5600 - US Amps AX Installation Manual

The 5-channel AX-5600 features a selectable 3-way electronic crossover with independent
front and rear mid-high frequency adjustment, dual power supplies, 2 ohm per channel
stability, and a Remote Bass Gain.
L
R
SUB Input
1
Remote Bass Gain
can be mounted in the passenger compartment to independently attenuate the low pass output.
The "BASS GAIN" located on the terminal endplate of the unit is used both to set the level at the
low pass output and control the range of the RBG.
2
3-WAY Input
allowing front to-rear fading of the mid-highs and Independent frequency and volume adjustment
from the passenger compartment.
Protection
AX-5600 is protected against
thermal, over and under voltage and short
circuit. The separate power supplies of AX-5600
are individually protected against over-current.
7
WARNING:
on the input of your U.S.Amp! It doesn't need it!
1
Sub Sub
Gain XOver
Min 50 500 200 5K
Rear LP
XOver
RBG

AX-5600

Five Channel Amplifier
DE Sub Channel
The AX-5600 comes with an optional "Remote Bass Gain" or "RBG" that
allows the AX-5600 to accept input from modern 3-way head-units
NEVER use ground-loop isolation
Rear
Band Rear
Gain
Pass HP
50 500 Max 50 500
Rear HP Front HP
XOver XOver
U.S.A.
2
2 Ohm Stability
All 5 channels of the AX-5600 are stable
to 2 ohms. The power of the mid-high
channels increase 17% from 4 to 2 ohms
while the subwoofer channel increases a
whopping 43%!
Amp Power @ 4 Ohms
75 W X 4 + 500 W X 1 @ 1Ω
Amp Power @ 2 Ohms
90 W X 4 + 500 W X 1 @ 1Ω
AX-5600
5-Channel Amplifier
Controls and Features
Front
Gain
L
Max
Pwr
R
Rear Front
Input Input
800
Total Watts
860
Total Watts