Ax-Tu4360C - US Amps AX Installation Manual

The AX-4360C features a selectable two-way electronic crossover with independent
front and rear mid-high frequency adjustment and 2 ohm per channel stability. Power is
provided by four 75 watt channels that can be bridged as front and rear pairs into a 4
ohm load for a total of 180 watts per bridged pair.
L
R
Front
Input
Amplifier Input
1
for proper operation.
2 Input Gain
is variable from 1 to 9 volts for full output. Best results are achieved by
adjusting the control to the lowest setting in relation to the output of the source unit.
3 Low-pass Crossover Control
For the internal amplifier, adjustable from 50 Hz to 500 Hz @ 24dB.
4 Remote Bass Gain
harness to allow the amplifier volume to be controlled from the passenger compartment.
5 Low-pass Crossover 3-way Switch
A 3-way switch which selects the full-range/high-pass/low-pass crossover feature.
WARNING:
on the input of your U.S.Amp! It doesn't need it!
2 3
1
Front Rear Front Rear
Gain Gain Freq Freq
Max Max 50 500 50 500

AX-TU4360C

X-TU4360C
Rear
Four Channel Amplifier
Input
The amplifier MUST receive input on BOTH RCA jacks
A phone jack that accepts the included RBG control
AX-TU4360C
4-Channel Amplifiers
Controls and Features
NEVER use ground-loop isolation
5
4
SUB
Freq
LP HP Full LP
Front
50 500
RBG
U.S.A.
HP Full
Pwr Prot
Rear
6