Using Your Extractor - CDA EVX90SS Use And Maintenance

Using your extractor

Controls
Power button
High speed button
Timer button
Fig. 1
Power button
Pressing once will start the extractor at the lowest speed
setting, pressing again will turn the extractor off
Light button
Turn the lights of the extractor on or off
High speed button
Press to activate the highest speed setting, the display
will show the number 3. Holding this button down for 3
seconds activates the booster function for 5 minutes and
the display will show the letter B
Middle speed button
Press to activate the middle speed setting, the display will
show the number 2
Low speed button
Press to activate the lowest speed setting, the display will
show the number 1
Timer button
Pressing this button will activate the timer function and cause
the display number to flash. The extractor will automatically
turn off after 15 minutes. Changing the speed setting will not
cancel this function. To cancel this function simply press the
timer button again
Light button
Low speed button
Middle speed button
Instruction Manual | 5