Troubleshooting - CDA EVX90SS Use And Maintenance

Troubleshooting

In the event of your appliance requiring technical assistance and/or
spare parts, please contact CDA Customer Care.
In this case it is necessary to state all the appliance data on the
rating plate, such as model, serial number etc. This information can
be found behind the grease filters
CDA Customer Care
Phone: 01949 862 012
Email: customer.care@cda.eu
Problem
The appliance does not
work
Output of appliance is
low
Extractor stops mid
operation
Reason
No power/ power outage
Wires have disconnected
Setting is too low for
amount of fumes present
Inadequate ventilation in
the kitchen
Charcoal filter (if fitted) is
blocked
Ducting is obstructed
Exit flaps on the motor
housing are restricted
There is a power outage
The circuit breaker or fuse
has tripped
Solution
Check the fuse, replace if
blown
Ensure the power supply is
securely connected
Try a higher speed setting
Ensure the kitchen has
sufficient air intake
Replace the charcoal filter
Remove any obstructions
from the ducting
Ensure any obstructions
are removed so the flaps
can move freely
Check the power supply
Check the circuit breaker
or fuse
Instruction Manual | 19