Advertisement
OSD Setup
H.Position
V.Position
Timeout
Transparence
Language
Extra
Input Select
Auto Config
Image Ratio
DDC-CI
Information
Reset
Reset
Exit
Exit
Notes:
1)If the product has only one signal input, the item of "Input Select" is disable to adjust.
2)If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disalbe to adjust.
3)One of DCR, Color Boost, and Picture Boost functions is active, the other two function is turned off accordingly.
LED Indicators
Status
Full Power Mode
Active-off Mode
How to use i-menu software
Installation
Welcome to use "i-menu" software by AOC. i-menu makes it easy to adjust your monitor display setting by menus on the screen instead
of OSD button on the monitor. Please click
0-100
0-100
5-120
0-100
Auto
Analog
Digital
yes or no
wide or 4:3
yes or no
yes or no
LED Color
Green or Blue
Orange or red
here
to setup the software. To complete installation , please follow the installation guide .
Adjust the verticalposition of OSD
Adjust the horizontal position of OSD
Adjust the OSD Timeout
Adjust the transparence of OSD
Select the OSD language
Select to Auto Detect input signal
Select Analog Sigal Source as Input
Select Digital Sigal Source as Input
Auto adjust the picture to default
Select wide or 4:3 format for display
Turn ON/OFF DDC-CI Support
Show the information of the main image
and sub-image source
Reset the menu to default
Exit the main OSD
Advertisement
