Clearing The Master Power Macro; Using Keymover; Programming Keymover - One for All DVD EXPERT URC-4041 User Manual

IMPVE4P manual 1.0 4/11/03

Clearing The Master Power Macro

1. Press and hold
blinks twice, then release
2. Enter
9
Then press
3. Press and hold
twice, then release
Macro is now cleared.

USING KEYMOVER

The One For All DVD Expert Universal Remote Control
includes a Keymover feature that allows you to map
(or copy) keys from one mode (i.e., source mode) to
another mode (i.e., destination mode).
NOTE: The following keys should not be used as a source or
destination: DVD/VCR, AUX, CBL/SAT, TV, SET, FAV, and REC.

Programming Keymover

For example, if your DVD player does not have volume
control, you can map those keys (i.e.,
) from TV mode to DVD/VCR mode as follows:
MUTE
1. Press and hold
blinks twice, then release
2. Enter
9
3. For the source mode, press
4. For the source key, press
5. For the destination mode, press
once.
6. For the destination key, press
7. The
LED
keymoved sequence is correct.
8. Repeat steps 1 through 7 twice more to
map remaining volume control keys,
substituting
destination keys in steps 4 and 6.
4:34 PM Page 13
until the (red light)
SET LED
.
SET
- - . The LED will blink twice.
9 5
once.
POWER
until the blinks
SET LED
. The Master Power
SET
L M
,
VOL VOL
until the (red light)
SET LED
.
SET
- - . The will blink twice.
9 4 LED
once.
TV
L
once.
VOL
DVD/VCR
L
VOL
will blink twice, indicating the
M
and as source and
VOL MUTE
continued on next page...
13
, and
once.