Universal Remote Control AVEX R6 Owner's Manual page 22

AV-EXpertManual.qxd
STEP 2: Press the VOLUME UP button and then
press either the TV or AUDIO component button that
you want to use for volume. The Component LED
light will blink three times to confirm that it is saved.
This sets up three buttons (Volume Up, Volume Down
and MUTE) as a group for that component.
VOLUME
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what's technically referred
to as a "Punch Through" feature and is not limited
to volume control. It can also be applied to other
groups of buttons. If you find yourself switching to a
particular component mode frequently to access a
particular control, consider using Punch Through.
7/12/07
UP
Page 22
6:41 PM Page 22