Care & Maintenance - Westinghouse WRC604WC Installation & User Manual

Canopy
Table of Contents

Advertisement

CARE & MAINTENANCE
Hand washing
Soak grease filter for about one hour in hot water with
a grease-loosening cleaner, then rinse off thoroughly
with hot water. Repeat the process if necessary. Refit
the grease filters when they are dry.
Dish washer
Place grease filters in the dishwasher. Select the most
powerful washing program and highest temperature,at
least 65℃. Repeat the process. Refit the grease filters
when they are dry. When washing the metal grease filter
in the dishwasher a slight discolouration of the filter can
occur, this does not have any impact on it's performance.
Note: The metal grease filters must be removed and
washed, either by hand or in the dishwasher, every four
weeks minimum.
Clean the inner housing using warm water and grease
loosening cleaner(never use caustic detergents,
abrasive powders or brushes).
Ensure that the appliance is switched off before cleaning
inner housing to avoid any possibility of electric shock.
Charcoal filter
The charcoal filter should only be used if you want to
use the hood in the recirculation function.
This filter cannot be cleaned or re-used and as a
general rule, the activated charcoal filter should be
changed once every four months.
Fitting charcoal filter
Fit one charcoal filter on the left and one on the right so
as to cover the plastic grids that protect the fan wheel as
indicated Fig.17.
Always specify the hood model code number and
serial number when ordering replacement filters.This
information is shown on the registration plate located
on the inside of this unit.
Replacement charcoal filters can be ordered from
your local service centre.
Fig.17
Changing the LED lamps
If LED lamps need replacing, they must be replaced by
lamps as stated in the technical specifications.
Remove the lamp cover by releasing the screw and replace
the new E14 LED lamps.
Ensure that the appliance is switched off before carrying
out maintenance to avoid any possibility of electric shock.
Suitable lamp for replacement
Lamp type: LED
Fixing type: E14
Voltage: 220~240V AC
Power: 2W
CARE AND MAINTENANCE
11

Advertisement

Table of Contents
loading

Table of Contents