Step 14 Install Cylinder Access Panel - Blue Rhino Endless Summer 153100 Owner's Manual

Contact 1-800-762-1142 for assistance.
Do not return to place of purchase.
Step 14 – Install Cylinder Access Panel
Line up holes on Latch with slots on Cylinder Shroud. Attach with (2)
Latch Screws and (2) Latch Nuts.
Line up holes in Access Panel hinges with holes in recessed area of left
leg. Attach each hinge with (2) Hinge Screws and (2) Hinge Nuts.
Swing Access Panel closed and slip Latch over panel hook and
snap shut.
Step 15 – Replace Engine Assembly
Slide Igniter wire onto Igniter post.
Position Engine Access Panel back in place.
Secure Panel in place with 3 screws previously removed from side and
bottom holes.
Note: Once you have successfully completed assembly steps 1-15 you
are ready to begin operating your heater.
Owner's manual: model 153100 outdoor patio heater 2/13/04
®
12