Table of Contents
Advertisement
Option
Enable Intel Speed Shift
technology
Auto On Time
USB Wake Support
Block Sleep
Advanced Battery Charge
Configuration
Primary Battery Charge
Configuration
Type-C Connector Power
Post behavior
Table 28. POST Behavior
Option
Adapter Warnings
Keypad (embedded)
Numlock Enable
Description
•
Wake on AC
By default, this option is disabled.
Allows you to enable or disable the Intel Speed Shift Technology option. By default, this option is enabled.
Allows you to set the time at which the computer must turn on automatically.
The options are:
•
Disabled—enabled by default
•
Every Day
•
Weekdays
•
Select Days
Allows you to enable USB devices to wake the system from standby. By default, the option Enable USB
Wake Support is disabled.
This option enables you to block entering to sleep in operating system environment. By default, the Block
Sleep option is disabled.
This option enables you to maximize the battery health. When you enable this option, your system uses
the standard charging algorithm and other techniques, during the nonwork hours to improve the battery
health. By default, the Enable Advanced Battery Charge Mode option is disabled.
Allows you to select the charging mode for the battery.
The options are:
•
Adaptive—enabled by default
•
Standard
•
ExpressCharge
•
Primarily AC use
•
Custom
If Custom Charge is selected, you can also configure Custom Charge Start and Custom Charge Stop.
NOTE:
All charging mode may not be available for all the batteries.
Allows you to set the maximum power that can be drawn from the type-c connector. The options are:
•
7.5 Watts—enabled by default
•
15 Watts
Description
Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power
adapters.
•
Enable Adapter Warnings—enabled by default
Allows you to choose one of two methods to enable the keyboard that is embedded in the internal
keyboard. The options are:
•
Fn Key Only—enabled by default
•
By Numlock
Allows you to enable or disable the Numlock function when the system boots.
•
Enable Numlock—enabled by default
System setup
25
Advertisement
Table of Contents
