Table of Contents
Advertisement
Option
UEFI Boot Path Security
Date/Time
System configuration
Table 21. System Configuration options
Option
SATA Operation
Drives
SMART Reporting
USB Configuration
Thunderbolt Adapter Configuration
20
System setup
Description
Allows you to control whether the system prompts the user to
enter the Admin password when booting to a UEFI boot path.
Click one of the following options:
•
Always, Except Internal HDD—Default
•
Always
•
Never
Allows you to set the date and time. The change to the system
date and time takes effect immediately.
Description
Allows you to configure the operating mode of the integrated SATA
hard-drive controller.
The options are:
•
Disabled
•
AHCI
•
RAID On—By default, the RAID On option is enabled.
NOTE:
SATA is configured to support RAID mode.
Allows you to enable or disable various drives on board.
The options are:
•
SATA-0
•
SATA–1
•
M.2 PCIe SSD-0
•
M.2 PCIe SSD-1
By default, all the options are enabled.
This field controls whether hard drive errors for integrated drives are
reported during system startup. This technology is part of the SMART
(Self Monitoring Analysis and Reporting Technology) specification. By
default, the Enable SMART Reporting option is disabled .
Allows you to enable or disable the internal/integrated USB
configuration.
The options are:
•
Enable USB Boot Support
•
Enable External USB Port
By default, all the options are enabled.
NOTE:
USB keyboard and mouse always work in the BIOS
setup irrespective of these settings.
Allows you to configure the Thunderbolt adapter security settings
within the operating system.
The options are:
•
Thunderbolt—This option is enabled by default.
•
Enable Thunderbolt Support
Advertisement
Table of Contents
