Table of Contents
Advertisement
Option
System Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup
Changes
UEFI Capsule Firmware
Updates
TPM 2.0 Security
22
System setup
Description
•
Enter the new password:
•
Confirm new password:
Click OK once you set the password.
NOTE:
By default, the Enter the old password field is marked as Not set. Hence, password
has to be set for the first time you login and then you can change or delete the password.
Allows you to set, change, or delete the system password.
The entries to set password are:
•
Enter the old password:
•
Enter the new password:
•
Confirm new password:
Click OK once you set the password.
NOTE:
By default, the Enter the old password field is marked as Not set. Hence, password
has to be set for the first time you login and then you can change or delete the password.
Allows you to enforce the option to always set strong password.
•
Enable Strong Password
By default, this option is disabled.
You can define the length of your password. Min = 4, Max = 32
Allows you to bypass the System password and the Internal HDD password, when it is set, during a
system restart.
The options are:
•
Disabled—This option is enabled by default.
•
Reboot bypass
Allows you to change the system password when the administrator password is set.
•
Allow Non-Admin Password Changes
By default, this option is enabled.
Allows you to determine whether changes to the setup options are allowed when an administrator
password is set. If disabled the setup options are locked by the admin password.
•
Allow Wireless Switch Changes
By default, this option is disabled.
Allows you to update the system BIOS through UEFI capsule update packages.
•
Enable UEFI Capsule Firmware Updates
By default, this option is enabled.
Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
•
TPM On—This option is enabled by default.
•
Clear
•
PPI Bypass for Enable Commands
•
PPI Bypass for Disbale Commands
•
PPI Bypass for Clear Command
•
Attestation Enable—This option is enabled by default.
•
Key Storage Enable—This option is enabled by default.
•
SHA-256—This option is enabled by default.
Advertisement
Table of Contents
