Smart card reader
Table 6-11
Smart card reader descriptions and part numbers
Description
Smart card reader board
Smart card reader bracket (included in Bracket Kit)
Smart card reader cable (included in Cable Kit)
Before removing the smart card reader, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the following components:
a.
Bottom cover (see
b.
Battery (see
c.
Optical drive (see
d.
Hard drive (see
e.
Solid-state drive or Optane memory module (see
f.
WWAN module and bracket (see
g.
Keyboard (see
h.
Internal frame (see
Remove the smart card reader:
1.
Disconnect the system board cable from the smart card reader board ZIF connector (1).
(Preparation for disassembly on page
Bottom cover on page
Battery on page
36)
Optical drive on page
Hard drive on page
40)
WWAN module on page
Keyboard on page
47)
Internal frame on page
35)
39)
Solid-state drive on page
43)
51)
Component replacement procedures
Spare part number
L58695-001
L59054-001
L09583-001
34).
42)
63