Charging The Accessory Handset - Uniden TWX977 Owner's Manual

Charging the Accessory Handset

The handset is powered by a rechargeable battery pack that
automatically recharges when the handset is placed in the
charger. Unlike your typical household phone chargers, your
new waterproof accessory handset uses an enclosed charging
method called magnetic inductive charging. This type charger
allows us to charge your handset without exposing any
electronic components; therefore, making it safer to use
around water or in highly humid environments.
1. Connect the AC
adapter to the DC
IN 21V jack and to a
120V AC outlet that
is not controlled by
a wall switch.
Caution: Use only
the Uniden AD-1011
adapter.
2. Set the charger on
a desk or tabletop,
and place the handset in the charger with the keypad facing
forward.
3. Make sure that the charge LED illuminates. If the LED does not
illuminate, check to see that the AC adapter is plugged in.
4. Charge the handset battery pack for at least 25 hours before
using your new handset for the first time.
Notes:
• The charger is not water submersible. Wipe off dirt or shake
water from handset before placing in the base.
• Due to the enclosed type of magnetic inductive charging
used with this model, it will be normal for the bottom of the
handset to be warmer than room temperature when you first
remove it from the charging cradle. However, the warmth
should not be excessive or uncomfortable to touch.
4