Table of Contents
Advertisement
26
C
ONFIGURING
b In the AuthLocalUser field, enter the username and
password for office B in quotes. For example, enter:
"OfficeB" "passwordB"
c Click Apply.
5 In the Dial on Demand Dynamic Dial section on the
navigation frame, click the PPP AuthRemoteUser link.
a In the start field, choose 4.
b In the AuthRemoteUser field, enter the username and
password for office A in quotes. For example, enter:
"OfficeA" "passwordA"
c Click Apply.
6 Enable port control to establish PPP connectivity using
access security.
a In the Dial on Demand Dynamic Dial section of the
navigation frame, click the PORT CONTrol link.
b In the start field, choose 4.
c In the CONTrol field, choose Enabled.
Your OfficeConnect NETBuilder bridge/router configuration
is complete.
Y
O
C
OUR
FFICE
ONNECT
NETB
10 B
UILDER
RIDGE
/R
OUTER
Advertisement
Table of Contents
