Display Menus Flowchart - Roland Camm-1 Pro GX-500 User Manual

6-2 Display Menus Flowchart

For details about each of the menus, see "6-3 List of Functions."
Power ON
GX-500
Roland DG Corp.
Select sheet
SELECT SHEET
* ROLL
< ROLL, F-EDGE, R-EDGE, PIECE >
ENTER
NOW LOADING • • • • •
Width and length of cutting area ( Note: The length of material feed is displayed inside square brackets ("[ ]") only when the selection for [SELECT SHEET] is set to either "ROLL" or "F-EDGE." )
W : 1195mm
L : ------ [0mm]
MENU
MENU
Present cutting condition
MENU
20cm/s UNSETUP
50gf 0.250mm A
CONDITION
CROPMARK
< SENSOR MODE >
Continue Continue
56
to [MEMORY]
to [QUALITY]
FORCE 50gf
SPEED 40cm/s
OFFSET 0.250mm
UPSPEED AUTO
ROTATE 0 deg A
AREA 1.0m
QUALITY NORMAL
to [FORCE]
CROPMARK
* SENSOR MODE
< SENSOR MODE
/ TOOL MODE
/ MANUAL >
FORCE 50gf
* 50gf
SPEED 20cm/s
* 20cm/s
OFFSET 0.250mm
* 0.250mm
UPSPEED AUTO
* AUTO
ROTATE 0 deg A
* 0 deg A
AREA 1.0m
* 1.0m
QUALITY NORMAL
* NORMAL
Only when the [MANUAL] is selected, it is possible to set.
Only when the [BASIC SETTINGS] is selected, it is possible to set.
to [OFFSET Y]
MANUAL DISTANCE X 180mm
* 4-POINT START
< 4-POINT START
/ 3-POINT START
/ BASIC SETTINGS >
DISTANCE Y 210mm
OFFSET X 0.0mm
OFFSET Y 0.0mm
to [DISTANCE X]
DISTANCE X 180mm
* 180mm
DISTANCE Y 210mm
* 210mm
OFFSET X 0.0mm
* 0.0mm
OFFSET Y 0.0mm
* 0.0mm