Water Valve Connections For The Detergent Drawer; Items Packed With Washer; Stacking Kit; Laundry Touch Up Paints - Samsung WF457ARG Series Troubleshooting Manual

Water valve connections for the Detergent Drawer

Red White Yellow
Hot Pre‐wash Bleach ‐ C Main ‐ C Steam/Power Jet
It is normal for a small amount of water
remaining in Detergent Drawer after it
completes washing. Bleach is usually
flushed out into the tub at the beginning
of the washing. Also, its compartment is
washed again during the following rinse
cycle, removing any remnants.

Laundry Touch Up Paints

TOUC H UP PAINT, BLU E ONYX
TOUC H UP PAINT, IMPERIAL SIL VER
TOUC H UP PAINT, N EAT W HITE
TOUC H UP PAINT, STRATUS GR AY
TOUC H UP PAINT, TANGO RED
Training — Plus One
Help — GSPN
The unit sometimes will pause during Sanitize, or Pure Cycle, wash modes and appear not to be functional. The Sani-
tize and Pure Cycle wash cycles have target temperatures to assure washer performance. If the water temperature
doesn't meet the target temperature during the wash cycle, the washer will automatically add extra time to allow the
heater to bring the water up to the programmed, or target temperature. In this stage, the displayed time will pause and
hold until the heating operation has been completed. It is at this point that the customer may feel that operation has
stopped. (The maximum added programmed time is 30 minutes)
Blue Red

Stacking Kit :

Samsung washers and dryers can be stacked to maximize usable space.
An optional stacking kit is available for purchase from your Samsung retailer
DH 81-11 980A
DH 81-11 981A
DH 81-11 982A
DH 81-11 983A
DH 81-11 984A

SUPPORT INFORMATION

http://my.plus1solutions.net/clientPortals/samsung/
http://service.samsungportal.com/
NOTICE

Items Packed With Washer

BOLT-SPANER (10-13mm Wrench) DC60-40146A
ASSY HOSE WATER DC97-15691A
ASSY HOSE WATER DC97-15692A
MANUAL-BOOK DC68-02535A
CAP-FIXER DC67-00307A
HOSE-HANGER DC62-10278A
(Model No : SK-5A/XAA)
When using non-HE
detergents, or using
too much detergent
for the water hard-
ness and soil level of
the clothing, over
sudsing will occur.
When this happens
there will be leaks out
of the detergent
drawer and door.
Please advise con-
sumer of proper de-
tergent usage.
Location considerations
Do not install your
washer in areas where
water may freeze, since
your washer will
always maintain some
water in its water valve,
pump, and hose areas.
This can cause
damage the belts, the
pump, hoses and other
components. Operating
temperature should be
above 60°F/16°C.