Table of Contents
Advertisement
1-3. Installation
The CAC-6 can be mounted to the desired position of the panning rod of a tripod at any angle the camera operator desires.
Installation examples
Installing the CAC-6
1. Loosen the screw on the mounting part, and
open it.
2. Clamp the panning rod with the mounting
part, and fasten the screw. Then adjust the
mounting angle and turn the lock lever to lock
the angle.
CAC-6
Camera
CAC-6
Installation examples
CAC-6
Lock lever
Panning rod
1-3 (E)
Advertisement
Table of Contents
