Manually Programming Racing Systems - Uniden BR330T Owner's Manual

12. If you have another
frequency to enter
for this driver, press
E then repeat from
Step 5. Otherwise,
press No
13. To enter another car
in this race, press E
then repeat from
Step 3. Otherwise,
press No
14. When you finish,
press Scan to begin
scanning the race
Manually Programming Racing
Systems
Program System
Menu
New System
E
Confirm?
The scanner creates an empty conventional system,
with a default name of System NN
NN increments as you add new systems. R indicates
that this is a racing system.
Refer to the appropriate section to set system-wide
options:
• See "Editing the System Name" on Page 80
• See "Setting System Lockout" on Page 81
• See "Setting the System Hold Time" on Page 82
• See "Setting the Channel Delay Time" on Page 82
• See "Setting Data Skip" on Page 115
• See "Deleting Systems" on Page 88
• See "Copying Systems" on Page 89
Programming Radio Systems
Another Freq for
This Driver?
Yes="E"/ No="."
Another Car For
This race?
Yes="E"/ No="."
Complete
Press SCAN Key
Racing
R.
63