Id Scan/Id Search Mode; Temporarily Holding On A System; Holding On A Channel - Uniden BR330T Owner's Manual

2. Release then press Hold within 2 seconds
Func
to hold on the system.
3. Rotate the scroll control to select the channel you
want to lock or unlock.
4. Press L/O to lock or unlock the channel.
You can also lock out an active channel by pressing
L/O while the scanner is stopped on the channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner
can be in either ID Scan or ID Search mode:
• ID Scan – the scanner only stops on talk group
ID's that you have programmed into the system
• ID Search – the scanner stops on any unlocked
talk group that becomes active.
To toggle between ID Scan and ID Search, press
then press Scan within 2 seconds while the scanner is
scanning the system.
If the scanner does not scan the system long enough
for you to easily do this, press
is scanning the system (or press
scroll control to select the system). Then, release
and press Scan within 2 seconds.
Func

Temporarily Holding On a System

To temporarily hold on a system, press and hold
To hold on a different system, continue to hold
and rotate the scroll control to select the system.
Normal scanning resumes 2 seconds after you release
.
Func

Holding On a Channel

To hold on a channel, press Hold while the channel is
active. To select a different channel, rotate the scroll
control. If you scroll past the beginning or end of the
current system, the scanner selects channels in the
46
Func
while the scanner
Func
then rotate the
Func
.
Func
Func