Scanning Systems; Preprogrammed System Tips - Uniden BR330T Owner's Manual

Scanning Systems

To begin scanning programmed systems, press Scan.
The BR330T scans all unlocked systems in all
activated quick-key groups and any searches
unlocked for search and scan.
Notes:
• If no systems are programmed, or all systems are
locked out, an error message appears. Program a
system or select a system to scan.
• When scanning multiple systems, the BR330T
scans systems according to the assigned quick
key. Systems assigned to quick key 1 are scanned
first, then 2, 3, 4, etc. Systems not assigned to a
quick key are scanned last, then unlocked
searches. Within a quick key, systems are
scanned in the order they were assigned.
• Within a system, channels are scanned according
to the assigned channel group, with the same
priority as described above for systems.
• The BR330T scans a system for the duration you
set using the System Hold Time option (see "Set-
ting the System Hold Time" on Page 82). For
trunked systems, the scanner moves to the next
system after the hold time expires, the current
transmission ends, and the channel delay expires.
Conventional systems operate similarly, but all
unlocked channels are scanned at least one time
regardless of the hold time setting.
• Each search range is searched for the amount of
time you set using the "Set Hold Time" option. See
"Setting the System Hold Time" on Page 82 for
more information.

Preprogrammed System Tips

All systems preprogrammed into the scanner are
assigned to a Quick Key. See "Preprogrammed Sys-
tems" on Page 148 for a list of preprogrammed
systems and their Quick Key assignments.
Basic Operation
43