Setting The Display Orientation; Adjusting The Display Contrast; Setting The Gps Format; Setting The Position Format - Uniden BCD996T Owner's Manual

Setting the Display Orientation

[MENU]
Settings
Set Upside-down
This setting controls the orientation of the display. If you set Upside-down to On,
the scanner inverts the display text and graphics.

Adjusting the Display Contrast

There are 15 contrast levels. As you scroll from level 1 to 15 you see the contrast
change. Press the Scroll Control to lock the desired level until the time you desire
to change it.
[MENU]
Settings
Adjust Contrast
Select a level Level 1 to Level 15

Setting the GPS Format

[MENU]
Settings
Set GPS Format
These settings control how the scanner handles GPS input when you are using the
location-based functions.

Setting the Position Format

[MENU]
Settings
Set GPS Format
Set Pos Format
This setting controls the format used for entering GPS coordinates into the
scanner.
DMS: DDD° MM' SS.ss — Enter the location in Degree, Minute, Second format.
DEG: DDD.dddddd — Enter the location in Degree and fraction format.
Setting the Time Format
[MENU]
Settings
Set GPS Format
Set Time Format
F
F
F
F
F
F
F
F
F
F
F
F
F
Programming General Settings
57