Listening To Am/Fm/Tv Channels; Directly Selecting A Channel; Using Am/Fm/Tv Channel Memory - Uniden BC370CRS Owner's Manual

Listening to AM/FM/TV Channels

To listen to AM/FM/TV channels, slide the
mode selector to AM/FM. Then, press the
soft button at the top of the scanner to select
the desired source (AM for AM Broadcast,
FM1 or FM2 for FM or TV Broadcast).

Directly Selecting a Channel

Press the DIR soft key to select the
DIR
direct entry mode. Use L or M to scan
up or down the selected band. The
scanner stops on active channels. TV
channels are scanned after FM
channels in FM mode.
You can also enter the channel frequency using the keypad. Enter the
channel frequency (for FM or AM) or the TV channel number.

Using AM/FM/TV Channel Memory

Your scanner has 30 AM/FM
MEM
memories for quick channel recall
(10 for AM, 20 for FM/TV). To store a
channel into memory, First press the
soft key to select the desired band
(AM, FM1 or FM2). Then, directly
select the channel you want to store
(see above). While listening to the channel, press and hold the number
button that corresponds to the memory you want to save the channel into
for 2 seconds. The scanner switches to the Memory mode for the current
band.
To quickly recall a channel, select the band, select the channel memory
mode by pressing the MEM soft key, then tap the number button that
corresponds to the memory where the channel is stored.
Listening to AM/FM/TV Channels
25