Uniden BC370CRS Owner's Manual page 12

Clock Display — The scanner always displays the current time.
The clock also features an alarm that lets you wake to the selected radio
source or an alert tone up to 20 minutes or be shut off manually.
A convenient snooze button lets you silence the alarm for an extra
5-minutes.
Delay — You can enable or disable the 2-second delay to resume
scanning when a transmission ends. Enabling this feature helps prevent
missing a response from one of the parties in the transmission.
LCD Backlight — You can enable or disable the LCD back lighted
display.
Contrast Adjust — Lets you adjust the LCD contrast for best viewing.
Key Touch Tone — A tone sounds to confirm you have made a valid key
input while a different tone sounds to alert you to an invalid entry.
EEPROM Memory Backup — The scanner uses a non-volatile EEPROM
for memory backup.
Battery Alert — A battery icon ( ) alerts you if no battery is installed
or the battery power is low. An alert tone sounds when the battery needs
to be replaced. The backup provides backup for the clock when external
power is off or not connected and will power scanning for a short time.
Auto Power Off — Turns the scanner off when the battery power gets
too low.
Introduction
12