Dimmer Light Setting; Controlling How Much Information Appears; Turning The Key Beep On/Off; Locking The Enter Key - Uniden APCO 25 Owner's Manual

Dimmer Light Setting

The Dimmer Light setting sets the brightness of the display backlight.
3:SYSTEM OPTION → 1:DIMMER
1:HIGH
Set the backlight to the brightest setting
2:MEDIUM
Set the backlight to be dimmer
3:OFF
Set the backlight off

Controlling How Much Information Appears

The scanner normally displays trunk, frequency, receiving mode, and a signal meter when it
is scanning. This option allows you to reduce how much information your scanner displays.
3:SYSTEM OPTION → 2:SCREEN MASK
1:ON
Display all information
2:OFF
Display reduced information

Turning the Key Beep On/Off

When Key Tone is turned on, the scanner beeps each time you press a key.
3:SYSTEM OPTION → 3:KEY BEEP
1:ON
Turn on the key beep
2:OFF
Turn off the key beep

Locking the ENTER key

To prevent accidentally changing channel settings, you can lock the ENTER key.
3:SYSTEM OPTION → 4:ENTER LOCK
1:ON
The ENTER key is disabled.
2:OFF
The ENTER key operates normally.
Note: The ENTER key operates normally when selecting menu options, even when you set
the option to ON.
22