Alarm Mode - Uniden UH015sx Owner's Manual

Uhf cb radio

Hide thumbs Also See for UH015sx:

Table of Contents

UNIDEN Model uh015sx UHF CB Radio

Alarm Mode

When a received code matches to your receiver Selcall ID and you selected the Call

Alarm Auto Mode the Unit will:

Transmit an Acknowledge tone to the Caller.

Emit CALL Alarm for 10 seconds only.

Resume Quiet condition automatically after 20 seconds if the call is not answered.

The Unit will start decoding again when the 20 second period elapsed and the call

remained unanswered.

Call Alarm Continue Mode

The Unit will transmit an Acknowledge Tone to the Caller.

Initially an alarm of four successive beeps is emitted for 20 seconds and then two

successive beeps every four seconds continuously unless answered.

The Quiet Condition is never resumed.

The Unit continues to check if incoming codes have your Receiver Selcall ID even

though the Quiet Condition is already opened.

When detected, it will send an acknowledge Tone to the caller and then resets the

Call Alarm.

For both of the above mentioned modes, transmission by using the Press-

to-Talk button is possible when the TSQ icon is flashing.

Press and hold

Selector until

then turn on the power. Rotate the Channel

is displayed.

Table of Contents

Show Quick Links

Table of Contents