To Operate In Duplex Mode - Uniden UH036SX Operating Manual

TO OPERATE IN DUPLEX MODE

Eg. CH1 is being used in your area for
repeater use.
Press momentarily. The
dup
appears.
Press again to deactivate the duplex
dup
operation. UH036SX
normal operation.
SCANNING
The scan function scans all channels and stops at an active
channel. When the signal stops, scanning resumes.
To initiate scanning,
1. Assuming the unit is on CH1
when switched on.
2. Press and hold Channel
for 3 seconds and scanning
starts.
3. Press Channel
or to cancel scanning.
PTT
If Channel
paused on a channel, scanning will be resumed.
icon
will return to
or
or ;
or is pressed while the unit is
8
dup
ch/ vol/
scan mon
mic