Table of Contents
Advertisement
BIOS Setup
BIOS Setup
Ths settng specfes the transfer rate (bts per second, data bts, party, stop
bts) of Console Redrecton.
▶
Flow Control
Flow control s the process of managng the rate of data transmsson be-
tween two nodes. It's the process of adjustng the flow of data from one
devce to another to ensure that the recevng devce can handle all of the
ncomng data. Ths s partcularly mportant where the sendng devce s ca-
pable of sendng data much faster than the recevng devce can receve t.
▶
VT-UTF8 Combo Key Support
Ths settng enables/dsables VT-UTF8 Combo Key Support.
▶
Recorder Mode, Resolution 100x31
These settngs enable/dsable the recorder mode and the resoluton
100x31.
▶
Legacy OS Redirection Resolution
Ths settng specfes the redrecton resoluton of legacy OS.
▶
Putty KeyPad
Ths settng specfes the type of Putty KeyPad.
▶
Redirection After BIOS POST
Ths settng specfes the Redrecton confguraton after BIOS POST.
[Dsable]
[Boot Loader]
[Always Enable]
▶
Smart Fan Configuration
▶
Smart FAN1 Target
Controls FAN1 fan speed automatcally dependng on the current temperature
and to keep t wth a specfc range. If the current CPU temperature reaches the
target value, the smart fan functon wll be actvated.
▶
Min Speed (%)
These tems allow users to select how percentage of speed for the FAN1.
3-10
Turn off the redrecton after POST
Set the Redrecton to be actve durng POST and Boot
Loader
Set the Redrecton to be always actve
Advertisement
Table of Contents
