Uniden XSA1255 Series Owner's Manual page 57

Symptom
After a power failure, the
outgoing message is deleted.
No sound on the base unit
speaker during call monitoring
or message playback.
Cannot access remote call-in
features from another
touch-tone phone.
Handset No. 1 or No. 2 is not
working (XSA1255+1 only).
Unavailable message is
displayed on the LCD screen
of the handset (XSA1255+1
only).
The handset doesn't
communicate with the main
base or the other handset
(XSA1255+1 only).
No 3- way conversation
Suggestion
• Record your personal outgoing message again. The default message should remain.
• Adjust the speaker volume on the base unit.
• Make sure you're using the correct PIN code.
• Make sure that the touch-tone phone you're using can transmit the tone for at least two
seconds. If it cannot, you may have to use another phone to access your messages.
• Make sure the battery pack is connected to the handset and fully charged.
• Re- register the non- functional handset.
• Make sure the other handset is not already in use. Both handsets cannot be in talk mode at
the same time.
• Place the handset in the main base for at least 5 seconds to re- register to the main base.
• Make sure the handset is not too far from the main base when trying to use.
• Re- register both handsets
• Only one handset at a time can talk with an outside caller. To allow the other handset to talk
to the caller, transfer the call.
[56]