Storing Caller Id Messages In Speed Dial Memory - Uniden XSA1255 Series Owner's Manual

Storing Caller ID Messages in Speed Dial Memory

Messages (Caller ID names/numbers) shown in the Caller ID list can be stored
in memory dialing. For instructions on viewing the Caller ID Message list, see page 29.
1) Press the caller id/menu key. Select the phone number to be
stored from the Caller ID list by pressing the
/vol/ key.
2) Press the memory key.
3) Enter a number (0-9) or press the
select the memory location to be stored.
4) Press the select/remote key (XSA1255) or the select/channel
key(XSA1255+1). You hear a confirmation tone,
and the number is stored in memory. The display returns
to the Caller ID list.
If a message has already been stored in the selected memory number location, a
confirmation screen is displayed.
Press the /vol/ key to select Yes. Press the select/remote key (XSA1255) or the
select/channel key(XSA1255+1) to overwrite. The display returns to the Caller ID list.
/vol/ or
/vol/ or /vol/ key to
[26]
You cannot store a
Caller ID message
if no phone
number appears in
the message.