Table of Contents
Advertisement
UP306EH (WDECT2310) ENG OM
• When the memory is
full, you will hear a
beep and "
" appears. You
cannot store names
and numbers.
• The pause key counts
as one digit. Pressing
the PAUSE soft key
more than once
increases the length
of the pause between
numbers. Each pause
represents a 2
second delay.
• Distinctive ringing
will only operate if
you subscribe to the
Caller ID service.
• Selecting a speed
dial location where a
number is already
stored, releases the
old number's speed
dial setting. The new
number will be
stored in the speed
dial location.
[ 28 ]
1/21/04
8:52 AM
Page 28
3) Press the STORE soft key, "
4) Enter the name (up to 16 characters) by using the
number keypad (see the "Steps for Entering Names and
Special Characters" on page 29).
If a name is not required, go to step 5.
be used as the name.
5) Press the OK soft key to store the name,
"
" appears.
6) Press the number keypad to enter the phone number (up
to 20 digits), press the OK soft key to store the number.
7) "
" appears. Press
to move the pointer to one of the Distinctive Ring
options, then press the OK soft key.
If you choose not to store a "
simply select the "
8) "
" appears. Press
move the pointer to select the Speed dial location (10
locations: SPD1-SPD0).
If you choose not to store the name/number as a Speed
Dial, simply select the "
9) Press the OK soft key. You will hear a confirmation
tone and "
" appears in the display.
" appears.
will
L
M
/
or
",
" option.
L
M
/
or
to
" option.
Advertisement
Table of Contents
